Decontamination

Pas

Air shower for personnel

Mas

Air shower for material

Misty

Decontamination water shower

PiBi

Static and dynamic Pass box

PiBi VHP

Pass box H2O2

PAS

Air shower for personnel

The air shower is employed to decontamine the clothing of the operator entering a controlled contamination room (cleanroom) or exiting from an area infected or contaminated with powders which must not propagate outside.
The air shower is designed on the basis of the personnel flow study.
A specific software ensures the ideal process conditions. Doors can be directed on request and, according to the access point, positioned on the front, at the corner or on three sides (3 doors version).

MAS

Air shower for material

The operating principle is based on the action of filtered air jets, HEPA degree according to ISO EN 14644-1 standards, which at a 25 m/s~ speed cause the detachment of inert or inactive particles keeping them off of materials passing through the shower.
Material can pass through the shower in both directions with different procedures. A specific software ensures the ideal process conditions.
The air shower can have glass doors with aluminium frame or rapid roll-up doors:
it depends on the shower dimensions, the type of passing material and the type of handling. Doors can be directed on request and, according to the access point, positioned on the front, at the corner or on three sides (3 doors version).

Misty

Decontamination water shower

Misty decontamination water shower operates through the action of water spray which dampens the operator clothing (generally made in Tyvek), to adhere the dust, without getting him wet.
This solution helps to prevent any propagation of the dangerous particulate outside the isolated area and allows the operator to remove contaminated clothing and avoid breathing in potential harmful substances.
The best strategy to achieve this purpose is to saturate quickly the area inside the shower, spraying water drops of 5-10 μ to wet the surfaces and create water pearls on the clothing.

PiBi

Static and dynamic pass box

Pass box PiBi is a high-tech equipment suitable to transfer materials between two areas differently classified, especially towards sterile areas in class A.
It can be easily installed both on pharmaceutical mobile walls and on masonry/plasterboard walls.
The different types of pass boxes, depending on their configuration, are referred to as:

  • PI.BI Simple Static only interlocked pass-through
  • PI.BI FL Laminar flow cleaning cycle pass-through
    PI.BI UV Pass-through with UV irradiation cleaning cycle
  • PI.BI Duell Pass-through with laminar flow cleaning cycle and UV germicidal lamp decontamination system.
  • PI.BI Spray Laminar flow cleaning cycle and decontamination system by atomising sanitising liquid

PiBi VHP

Pass box H2O2

Pass box with VHP (Vaporized Hydrogen Peroxide) biodecontamination system is suitable to sterilize thermolabile products.
The chamber will be used to introduce into sterile areas all those materials that cannot be sterilized in an autoclave, typically heat sensitive products such as sterile petri-
dishes; sterile materials for validation or cleaning activities, such as disinfectants, electronic particle meters, laptops, etc.

Contamination control equipment

Contact us now and find out how we can support you and your business